YAMAHA FZ 150/IXION Concept

View previous topic View next topic Go down

YAMAHA FZ 150/IXION Concept

Post  barrenwizard on Mon Apr 21, 2008 2:26 am














Yamaha FZ 150

ENGINE:
-Single Cylinder
- 4-Stroke
- 4 Valves
- Fuel Injected
- 15 BHP (Estimates)
- 13 NM Torque (Estimates)

Chassis:
- Deltabox (Imported from the late and popular Yamaha 150 TZM with abit of changes)
- Welded

Wheels:
- 17" Inch Ryms

Fuel Capacity:
- 12 Litre's (2 Litre Reserve)]

Braking System:
- Hydraulic Front Disc Brake
- Drum Brake

Sit:
- Single Touring Sit (Just like the TZM or the RXZ)


IXION Specs (Just a rough specs from what we're able to see at that moment)

IXION Setup:
- Undertail Exhaust
- Rear Hugger
- Grimeca 17x13.30" Ryms (MADE IN ITALY)
- Nissin Rear Brake Caliper
- GOODRICH Steel Braided Brake Host
- Carbon Fibre Rear Fender
- Carbon Fibre Side Housing (Ride Below the Engine and seats)
- LCD
- Front USD Fork (Kayaba "Claimed")
- Solid Rear Swingarm


NOTICE: Specs are referring to the Yamaha FZ 150 Model. Ixion specs will be stated in RED


Last edited by barrenwizard on Mon Apr 21, 2008 3:10 am; edited 9 times in total

_________________

"MAN IS A PUPIL, PAIN IS HIS TEACHER"

barrenwizard

Number of posts: 263
Age: 27
Location: Johor Bahru, Johor
Registration date: 2008-01-09

View user profile http://www.friendster.com/barrenwizard

Back to top Go down

Technical Aspect

Post  barrenwizard on Mon Apr 21, 2008 2:26 am



Notice the difference between both of the cone bearing from the Ixion and the marketed FZ 150 model. IMO, its possible that the front fork can be changed into a USD fork like the Concept Ixion Bike. Insider says that its from KAYABA "KYB".




Looks familiar? Its not 100% same as the Yamaha 150 TZM but look at it clearly and it still is 90% the same as a Yamaha TZM.



Yea, the cone bearing where everybody is curious about.




The 2-Pot Front Brake and the 1-Pot Rear brake. Hose is a steel braided GOODRICH cable.



Notice the KYB monoshock. Yes, KYB is supplying Yamaha for their FZ model.






Alright, no commend for this. Feel free to check it out yourself.

_________________

"MAN IS A PUPIL, PAIN IS HIS TEACHER"

barrenwizard

Number of posts: 263
Age: 27
Location: Johor Bahru, Johor
Registration date: 2008-01-09

View user profile http://www.friendster.com/barrenwizard

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  zul_cbr on Mon Apr 21, 2008 1:13 pm

I've no doubt this bike would rocket out our market.

ps - if i'm not mistaken, they spelled it V-1X10N. yes, its truly breathtaking. Smile

zul_cbr

Number of posts: 642
Age: 26
Location: JB-Ayer Keroh,Melaka
Registration date: 2008-01-09

View user profile http://profiles.friendster.com/mzul

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  rPiz on Mon Apr 21, 2008 6:29 pm

zul_cbr wrote:I've no doubt this bike would rocket out our market.

ps - if i'm not mistaken, they spelled it V-1X10N. yes, its truly breathtaking. Smile

yup, i agree....
the v-1X10N look astonishing and brutelle...
hurmm.
does it have the same power like fz???

rPiz

Number of posts: 156
Location: batu pahat - ayer keroh,mlke
Registration date: 2008-01-12

View user profile http://profiles.friendster.com/hafizhassan881114

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  barrenwizard on Mon Apr 21, 2008 6:53 pm

I doubt it will have the same power as the FZ.

Why? Look at the big fat tyres and the accesories that the Ixion is having. Its not racing material. Its all heavy duty equipment, which meant increase in weight. Its just a 150cc Engine. Though we did discuss that some minor changer to the FZ is possible to be like the Ixion but not 100%.

For example, the headlights, just like a Kawasaki Z-model. Than the Lower Housing to touch up that empty/naked look. Plus the disc brake at the rear for some sporty performance. Front USD Forks plus that solid rear swing arm with rear hugger. Ryms and the rest are okay.

_________________

"MAN IS A PUPIL, PAIN IS HIS TEACHER"

barrenwizard

Number of posts: 263
Age: 27
Location: Johor Bahru, Johor
Registration date: 2008-01-09

View user profile http://www.friendster.com/barrenwizard

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  han_JKR on Mon Apr 21, 2008 8:36 pm

this a pic that i want to share with..



how about this??? Cool

han_JKR

Number of posts: 53
Age: 25
Location: Ayer Keroh,Melaka @ Kulai, Johor Darul Takzim
Registration date: 2008-01-26

View user profile

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  barrenwizard on Mon Apr 21, 2008 8:43 pm

Its kind of overkill don't you think? Michelin Pilot Power plus that of that huge exhaust.

Hmmm, don't think those small bikes going to need things that sticky and that huge, its just plain heavy. Might as well ride an RXZ. So much easier on the eye and on the pocket.

Problem is, its not necessary for it to look like a big bike unless it doesn't affect the bike's capability. Its like Putting a Powerful Mother Board for your PC but with low-end hardware.

_________________

"MAN IS A PUPIL, PAIN IS HIS TEACHER"

barrenwizard

Number of posts: 263
Age: 27
Location: Johor Bahru, Johor
Registration date: 2008-01-09

View user profile http://www.friendster.com/barrenwizard

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  han_JKR on Tue Apr 22, 2008 1:37 am

yeah..
i agree with your statement barren..
rather than modify the fz become look alike big bike...
it is better to have the big bike.. Very Happy

han_JKR

Number of posts: 53
Age: 25
Location: Ayer Keroh,Melaka @ Kulai, Johor Darul Takzim
Registration date: 2008-01-26

View user profile

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  scid on Tue Apr 22, 2008 10:55 am

maybe u can..but have to touvh up a bit ur engine..maybe putting a racing piston....blablabla..then after increasing ur HP then u can have all that....but for me..looks better than speed....cruising lol...speed I can get a more big bike for that..hheeheh..kalo limited edition tuh kuar mesti kepompom aku beli...tp betoi ka tuh..jgn potoshoop sudahhhhhhh Evil or Very Mad

scid

Number of posts: 431
Age: 30
Location: Skudai, Johor ~ Gopeng, Perak
Registration date: 2008-01-10

View user profile

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  pink guava on Thu Jul 16, 2009 9:56 am

pameran kat mana tu? bila? siapa anjur? brp hinggit? dari segi ghupa cantik menarik, tp apasal dioghang tak sumbat sekali single side tire, potoing betul la masih lg guna swingarm biasa, alang2 dah bikin.


Last edited by janggut on Thu Jul 16, 2009 10:05 am; edited 1 time in total

pink guava

Number of posts: 3
Location: KL-MUOR
Registration date: 2009-07-16

View user profile http://realtimeontime.blogspot.com

Back to top Go down

Re: YAMAHA FZ 150/IXION Concept

Post  pink guava on Thu Jul 16, 2009 10:01 am

barrenwizard wrote:I doubt it will have the same power as the FZ.

Why? Look at the big fat tyres and the accesories that the Ixion is having. Its not racing material. Its all heavy duty equipment, which meant increase in weight. Its just a 150cc Engine. Though we did discuss that some minor changer to the FZ is possible to be like the Ixion but not 100%.

For example, the headlights, just like a Kawasaki Z-model. Than the Lower Housing to touch up that empty/naked look. Plus the disc brake at the rear for some sporty performance. Front USD Forks plus that solid rear swing arm with rear hugger. Ryms and the rest are okay.

anyone cares to dump those stuff on my tzm, we'll see whether it still has enough power.

pink guava

Number of posts: 3
Location: KL-MUOR
Registration date: 2009-07-16

View user profile http://realtimeontime.blogspot.com

Back to top Go down

View previous topic View next topic Back to top


Permissions in this forum:
You cannot reply to topics in this forum